Powermatic 29 Manual do Utilizador descarregar pdf (Página 15)

(continued)

Trouble-Shooting for Model 29 Shaper

PROBLEM POSSIBLE CAUSE SOLUTION

Cuts not smooth. 1. Wrong R.P.M. 1. Use faster speed.

2. Feed too fast. 2. Pass stock more slowly.

3. Working against grain. 3. Work with grain whenever possible.

4. Cutting too deep. 4. On very deep cuts make several

passes.

Spindle does not raise 1. Sawdust and dirt in raising mechanisms. 1. Brush or blow out loose dust and dirt.

freely.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Sem comentários

Powermatic 29 Manual do Utilizador Página 15