Powermatic WP2510 Manual do Utilizador descarregar pdf (Página 33)

15. Calibration

Step 1: Press

Display

Step 2: Use

to move the planer table until

M15S terminates the calibration and restarts.

16. M15S Troubleshooting

Display

“Change RST” message appears when the Controller detects a motion in the wrong

direction. For example, the Controller switches the outputs to move upward but the

table starts moving in the reverse direction. Usually this is caused by the wrong wiring of

the three phase motor.

Press to clear.

Check the wiring and change if necessary.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 55 56

Sem comentários

Powermatic WP2510 Manual do Utilizador Página 33